|
Sliding bearings with reunite the material
中
文 |
 |
 |
 |
|
（1）SJ-4
High Tin Bimetal Bushing |
（2）FB090
Bronze Bushing |
（3）FB-090G
Self-Lubricating Bronze Bushing |
SJ-4 High Tin Bimetal Bushing:
This kind of bushing is wrapped by steel board, which is coated a layer of
high tin-aluminium alloy material on surface.
SJ-4 is widely used in auto-engine and auto-transmission case, etc. |
FB090 Bronze Bushing: This is a
kind of bushing wrapped by bronze strip. The bronze is of particular
formulation with high specific gravity and on its surface may be in
corporated with spherical or lozenge shaped indentations or oil grooves as
required by customers.
FB090 is used in agreculture machines |
FB-090G Self-Lubricating Bronze
Bushing
FB090G Self-Lubricating Bronze Bushing: This is from FB090, a kind of
steel-lead bronze alloys based bearing which is embedded with particular
formalation of soild lubricants. Owing to the high strength, high load
capacity and the spirrally distributed lozenge type of embedded solid
lubricant, the high temperature lubricating action and wear resistant action
is extraordinally exploited. The lubrication area of the bearing surface is
being about 25 percent.
FB090 is widely used in starting motor of automobiles, generators,
hoisting machines, various cranes, those machines in metallurgical industry,
and used as the linning of ball bearing with special requirement, etc. |
 |
 |
 |
|
（4）FB-092
Bronze Bushing With Holes |
（5）500#
Solid-Lubricant-Inlaid Bushing |
（6）F
R Bronze Self-Lubricating Bushing And Strips |
| FB092 Bronze Bushing with hole:
This kind of bushing is based on brass alloys with high density. The special
designed lubricating holes can reach a lubricating surface more than 20
percent. |
500# Solid-Lubricant-Inlaid
Bushing
Oiless #500 Solid_Lubricant_Inlaid Bushing: This kind of bushing has a
backing made of high-strength coper alloy and produced with advanced casting
techniques. The solid lubricating material inlaid in the bushing is
compounded in a unique way. #500 is used in succesive casting machines,
steel rollers in metallography, mineral machines, ship, turbogenerators,
hydraulic turbines and injection molding machines for plastics, machine hand
and the oil platform on sea, etc. |
FR Bronze Self-Lubricating Bushing and Strips: This products have
phosphorous bronze meshes as their backing and modified PTFE as their
anti-wear layers on both or single side of the meshes.
FR products are widely used in auto door hinges and shock absorbers for
automobiles and motorcycles, the operating rod for cars, and instruments,
etc.
|
 |
 |
 |
|
（7）F
D Filled Ptfe Soft Strips |
（8）YM-100
Steel-Lead Bronze Alloy Bushe |
（9）Lines
of Sf-1Y-2Y(DU、DX)
Three-Layer Composite Materia |
| FD Filled PTFE Soft Strips:
This is a kind of material made of filled PTFE which is mold pressed and
sintered. The mass is than cut into thin strip by particular technique. FD
prodcut is mainly used in oil damping vibrating absorber of automobiles, and
the slidway of machine tools, etc. |
YM-100 Bronze-Lead Steel Alloy
Bush is wrapped by strip of the double layer plate which is composed of a
steel baking and sintered with a lead bronze anti-wear surface layer.
It bears stronger adhesive strength and much higher load capacity. It is
suitable on the conditions of middle speed, middle load and low speed, high
load. It has various kinds of lubrication indentation or grooves, and can be
used in different environment, motor cycles, gear pumps, hydraulic pumps,
refrigeration compressor pups, machine tools, light mechanical machines,
civil engineering machines and crane equipment ect. |
It's a new kind of SF-1 which
composes of a specially designed surface layer of PTTE formulations and is
specifically applied for the high PV value of gear pump bushes. It's used in
high pressure gear pumps, plunger pumps, as well as vane pumps and so on.
|
 |
 |
 |
|
（10）Sf-1M
Repeated Moving Shaft Bearing |
（11）Lines
of Steel Soft Nitriding Shaft Sleeve |
（12）Lines
of non-standard punching |
| It's a new kind of SF-1 which
composes of a specially designed product according to it's reciprocating
motion workmanship condition. It's used in absorber of automobiles,
motorcycles, various hydraulic gas cylinder & motors and pneumatic elements.
|
It is adopted with 35# good
quality carbon steel through quality processed and soft nitriding processed,
with great bearing capacity and good durable performance etc. It is main use
in gear of motorcycle, transmission mechanism etc.
|
It is made up of domestic good
quality cold-rolled plate, it is designed according to the user's
requirement, with high precision, high quality. Is has widely uses, it is
major exported far to Euro. America as well as all over the world.
|
 |
 |
 |
|
（13）Lines
of Check Ring, High strength Back-up ring, Punching |
（14）Stainles
steel self-lubricating bearing(SF-1S) |
（15）Boundary
Lubricating Bearing (SF-2) |
It is made up of domestic good
quality cold-rolled plate, it is designed according to the user's
requirement, with high precision, high quality. Is has widely uses, it is
major exported far to Euro. America as well as all over the world.
|
The material of this product
is based on stainless steel plate with a sintered porous bronze layer as its
interlayer which is coated with the compound of PTFE on its surface. The
material is without PB. It's used in foodstuff machines, pharmaceutical
machines, printing and dyeing machines, etc. |
It's made of high quality
low-carbon steet, with a interlayer of sintered porous bronze and POM on its
surface. It's used in vehicle chassis, forming machine tools, steel
metallurgical machinery, mineral mountain machinery, hydraulic industry and
rolling steel industry, etc.
|